Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
Temperature Controlled Coolant Fluquid®FCM-160
Fluquid®FCM-160 stands as a groundbreaking solution for temperature-controlled coolant in the semiconductor industry, delivering unmatched performance, safety, and environmental responsibility.
Description:
Fluquid® FCM-160 is a revolutionary temperature-controlled coolant specifically designed for applications within the semiconductor industry. This cutting-edge coolant represents a significant leap forward in thermal management technology, offering unparalleled performance and environmental sustainability.
Performance Data
|
Item |
Unit |
FCM-160 |
Description of Related Function |
|
boiling point |
℃ |
160~165 |
operating temperature range in high temperature |
|
pour point |
℃ |
-88 |
operating temperature range in low temperature |
|
density |
g/ml |
1.803 |
|
|
specific heat capacity |
KJ/Kg.℃ |
1.074 |
heat dissipation capability |
|
coefficient of thermal conductivity |
W/m.k |
0.0889 |
thermal conductivity efficiency |
|
kinematic viscosity |
cSt |
3.095 |
The fluidity is related to the power of circulating pump. |
|
surface tension |
mN·m |
16.47 |
penetration ability |
|
volume resistivity |
Ohm-cm |
1.0x1015 |
insulation property |
|
dielectric strength |
KV（1mm,Gap） |
>25 |
Insulating property |
|
dielectric constant |
1kHz |
2.6 |
\ |
The test data was obtained under the test condition at 25 ℃.
Application Areas:
Chiller temperature control system for semiconductor manufacturing, single-phase Immersion cooling of energy storage batteries, temperature control fluids for testing equipment, and reliability testing fluids.
Quality Standard
|
Item |
Unit |
FCM-160 |
Testing method |
|
purity |
% |
＞99.5 |
chromatograph analysis |
|
moisture |
ppm |
＜50 |
moisture meter analysis |
|
acid value |
ppm |
＜50 |
indicator method |
|
evaporated residue |
% |
0.01 |
drying and weighing method |
Safety Data
|
Item |
Unit |
FCM-160 |
Description of Related Function |
|
flash point |
℃ |
\ |
incombustible, safe for environment |
|
LD50, Acute transoral stimulation |
mg/kg |
＞5000 |
low toxicity, safe for human |
|
LC50, Acute inhalation stimulation |
mg/㎡ |
＞5000 |
low toxicity, safe for human |
|
Acute skin irritation |
\ |
no irritation |
safe for human |
|
Acute eye irritation |
\ |
no irritation |
safe for human |
As this product is safe and environmentally friendly during use, it is not classified as a hazardous chemical.
Environmental Data
|
Item |
FCM-160 |
Description of Related Function |
|
ODP |
0 |
low impact on atmospheric environment |
|
GWP |
156 |
low impact on atmospheric environment |
|
Environmental testing |
|
|
Test items |
Test Result(s): |
|
EU RoHS Directive (EU) 2015/863 amending Annex ll to Directive 2011/65/EULead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls(PBBs), Polybrominated diphenyl ethers (PBDEs), Bis(2-ethylhexyl) phthalate(DEHP), Butyl benzyl phthalate (BBP), Dibutyl phthalate (DBP) and Diisobutylphthalate (DIBP) |
PASS |
|
As requested by client, SVHC screening is performed according to:(i) Two hundred and thirty-three (233) substances in the Candidate List of Substances of Very High Concern (SVHC) for authorization published by European Chemicals Agency (ECHA) on and before Jan 17, 2023 regarding Regulation (EC) No 190712006 concerning the REACH.(ii) One (1) potential Substances of Very High Concern (SVHC) in the notification of WTO on Jun 1, 2021. |
PASS |
|
Entry 68 of Regulation (EU) 2021/1297 amending Annex XVI of REACH Regulation (EC) No 1907/2006-- C9-C14 PFCAs, their salts and C9-C14 PFCA-related substances |
PASS |
|
Perfluoroalkyl and polyfluoroalkyl substances (PFAS) Content |
Not Detected |
|
European Regulation POPs (EU) 2020/784 amending to Regulation (EU2019/1021 - Perfluorooctanoic acid (PFOA) and its salts, PFOA-Related Substances, Perfluorooctane sulfonates (PFOS) and its derivatives |
PASS |
Product Features and Advantages:
1. Organic Fluorinated Liquid (HFO Type): Fluquid® FCM-160 ensures high performance and reliability in temperature control with its organic fluorinated liquid.
2. Enhanced Thermal Management: Fluquid® FCM-160 enables precise temperature control for optimal performance in semiconductor processes.
3. Improved Safety: Its flame-retardant properties reduce the risk of accidents and equipment damage.
Usage, Transportation, and Storage Guidelines:
For products not classified as hazardous chemicals, they are transported as general cargo. When storing this product, it is imperative to maintain it in a cool and well-ventilated environment, ensuring the temperature does not exceed 40°C. Additionally, it should be kept away from open flames and direct sunlight.
Avoid storing this product alongside strong acids, alkalis, and oxidants to prevent any potential reactions.
Packaging Method
Packaging method: 5kg, 15kg, 30kg, 250kg.
